How To Remove Mold From Bathroom Walls

It may seem strange, but it is true: bathroom with all its apparent cleanliness and neatness is the dirtiest place in the house by the availability of microbes and viruses. Ladies do cleaning in the bathroom more often. It was there that use the most “fusion cleaners. But, nevertheless, there is still many times more fungi and bacteria than in all other residential premises. Why? It is all because of the humidity and heat. This is the most favorable conditions for microbial growth, no matter what we did. There is only one solution: do regular cleaning, using quality cleaning agents. After all, if no action is taken on time, health problems will not be avoided.

Bathroom must be clean, especially if you have a big family. Bacteria lurk around the room (not only in the toilet bowl): on the floor, on sink and bathtub, on the curtains, even on toilet paper and shower handle. Experts say that it is a fungus in the bathroom is the cause of unpleasant odor, which persists even after the use of expensive air freshener. Thus, instead of masking, it is better simply to withdraw the fungus in your bathroom without a trace.

On the tiles (especially at its seam) there are a huge number of bacteria and fungi that help retain moisture, mold and other harmful microorganisms. It is needed once a week wash with a rubber scraper or sponge and sanitize the tile surface with the application of special cleaning agents. You can remove mildew with help fluid of bleach and water in equal parts. Spray the fluid to the tile and leave for about half an hour to give the drug time to act. You can then wipe the surface with a sponge or a rough brush.

The bathroom sink is in second place, after a shower, on the content of fungi and bacteria. Not so much sink, how much pipe under it absorbs all kinds of pollution. It would be best to dismantle part of the pipe below the sink and thoroughly clean it and remove all deposits and plaque, accumulated in the pipe. You’d be surprised how much garbage piled up there. Then apply a product to clean and leave it about 15-20 minutes to allow the abrasive substances to act. Repeat this procedure with a sponge, wash the tube with hot water and let it dry. Then you can return it to its place. This steps will provide protection against fungus for a few months.

You should clear places where water accumulates very carefully: soap dishes, cups to toothbrushes, shelves and bars on the shell. Do not forget about the jam.

Bathtub of new generation is very comfortable and aesthetic, but requires special attention when cleaning. Do not believe that acrylic bathtub is not exposed to pollution. In addition, these bathtubs can be cleaned only without the use of abrasive, acidic or alkaline substances (to avoid damage the coating). You can prepare a cleaning mixture of your own: use ordinary baking soda, soap and a few drops of fragrant oil. Apply the product to the entire surface of the bathroom (including those on external walls), and wipe off with a rough sponge after 10 – 15 minutes. To remove lime yellow spots prepare a solution of salt and turpentine (put protective gloves). Well wash the pipe under the bath. Several times a week, drain the hot water back to the vinegar. This will help bring the fungus out of the bathroom and did not give him to settle again.

Article Source: http://EzineArticles.com/5886637